i.
j.
NOTE:
When your operating system is earlier than Windows 2000, create settings according to the
manual of the wireless setting tool provided by your wireless device manufacturer.
For Windows Vista:
Open
Control Panel
.
a.
Select
Network and Internet
.
b.
Select
Network and Sharing Center.
c.
Select
Connect to a network
.
d.
Select
dell_device
from the network items listed in
Connect to a network
.
e.
Select
Connect Anyway
in the warning dialog box indicating you are entering an unsecured
area.
f.
Click
Close
in the dialog box after confirming the connection is a success.
g.
Set up the printer wireless adapter IP address.
Reset the settings for the wireless adapter to the default.
a.
2.
i. Press
Menu
on printer control panel.
ii. Scroll down and select
Admin Menu
.
iii. Scroll down and select
Wireless net
.
iv. Scroll down and select
Reset MPC
.
v. Restart the printer.
Retrieve the wireless adapter IP address on the printer.
b.
i. Press
Menu
on the printer control panel.
ii. Scroll down and select
Admin Menu
.
iii. Scroll down and select wireless net.
iv. Scroll down and select
TCP/IP
.
v. Scroll down and select
IP Address
.
(Default IP address range: 169.254.
xxx.yyy
)
Access Dell Printer Configuration Web Tool on your computer browser.
Assign the PC IP address by DHCP mode (Change the TCP/IP properties to obtain the IP address
automatically).
a.
b.
3.
Summary of Contents for 3110 Color Laser
