1.
NOTE:
If your computer provides a wireless LAN adapter tool, change the wireless settings using this
tool. Or you can change the wireless settings using the tool provided by the operating system. See the
instructions below.
Select
Network Connections
from Control Panel.
a.
Right-click
Wireless Network Connection
and select
Properties
.
b.
Select the
Wireless Networks
tab.
c.
Make sure the check box for
Use Windows to configure my wireless network settings
is
checked.
d.
NOTE:
Be sure to write down the current wireless computer settings in steps d and f so that you
can restore them later.
Click the
Advanced
button.
e.
Select
Computer to Computer (ad hoc) networks only
and close the
Advanced
dialog box.
f.
Click the
Add
button to display
Wireless network
properties
.
g.
Under the
Association
tab, enter the following information and click
OK
.
h.
Network name (SSID): dell_device
Network Authentication: Open
Data encryption: Disabled
Ad hoc network: checked
Click the
Move up
button to move the newly added SSID to the top of the list.
i.
Click
OK
to close the
Property
dialog box.
j.
NOTE:
When your operating system is earlier than Windows 2000, create settings according to
the manual of the wireless setting tool provided by your wireless device manufacturer.
Check the IP address on your computer.
2.
e.g.: 1.2.3.4
Set the IP address on the printer.
3.
e.g.: 1.2.3.5
Open Dell Printer Configuration Web Tool using WEB browser.
4.
e.g.: http://1.2.3.5
5.
Summary of Contents for 3110 Color Laser
