1.
Right-click the printer that is using the PS driver, and then select
Properties
from the displayed list.
2.
Click the
Device Settings
tab, and then select the total amount of the installed print memory for the
Memory Capacity
item under
Installable Options
.
3.
Click
Apply
, and then click
OK
.
4.
Close the
Printers and Faxes
dialog box.
5.
Windows 2000/NT 4.0
Click
Start
Settings
Printers
.
1.
Right-click the printer that is using the PS driver, and then select
Properties
from the displayed list.
2.
Click the
Device Settings
tab, and then select the total amount of the installed print memory for the
Memory Capacity
item under
Installable Options
.
3.
Click
OK
.
4.
Close the
Printers
dialog box.
5.
Mac OS X
Select the printer from the
Printer List
screen in
Print Center
(or
Printer Setup Utility
).
1.
Click
Printers
on the
Print Center
(or
Printer Setup Utility
) menu bar, and select
Show Info
.
2.
Select
Installable Options
, and select the options that have been installed on the printer, and then
click
Apply Changes
.
3.
Click
Apply
, and then click
OK
.
4.
Installing the Dell Multi Protocol Card
A multi protocol card allows you to use the following network protocols.
Summary of Contents for 3110 Color Laser
