· Cyan
· Yellow
· Magenta
Error
NNN-NNN
relates
to printer problems.
Replace Cart.
NNN-NNN
Replace
XXX Cartridge
The print cartridge is low
on toner.
XXX
is one of the
following:
· Black
· Cyan
· Yellow
· Magenta
Error
NNN-NNN
relates
to printer problems.
Remove the specified print cartridge and install a new
one.
NOTE:
If you do not replace the print
cartridge, print quality problems may occur.
Order a new print cartridge at the website
(
www.dell.com/supplies
or
www.euro.dell.com/supplies
).
See "
Replacing Print Cartridges
"
Error XXX Cart.
093-NNN
Check XXX Cart.
Contact Support
The density of the print
cartridge is not enough.
XXX
is one of the
following:
·
Yellow Print
·
Cyan Print
·
Magenta Print
·
Black Print
Confirm that the toner seal is removed from the
specified print cartridge and the cartridge is installed
correctly. If this does not solve the problem, contact
Dell.
See "
Replacing Print Cartridges
"
See "Contact Dell" in the
Owner's Manual
.
Close FrontCover
077-300
Front Cover
Is Open
Printer cover is open.
Close the specified cover.
Load
XXX
NNN-NNN
Load YYY
yyy
Incorrect paper size is
loaded in the specified
tray.
XXX
indicates the
number of the tray or
multipurpose feeder.
YYY
indicates a paper
size.
yyy
indicates paper
quality.
Error
NNN-NNN
relates
to printer problems.
Load the specified paper in the specified trays.
See "
Loading Print Media in Standard and Optional
Trays
"
Out of Memory
016-700
Job too Large
Press
The printer memory is
full and cannot continue
processing the current
print job.
· Press
to clear the message, cancel the current
print job, and conduct the next print job, if any.
· Press
Cancel
to cancel the print job.
· Press
Menu
to open
Stored Print
and delete the
holding job.
· To avoid this error in the future, do the following:
· Delete unnecessary fonts, macros, and other data
in printer memory.
· Install additional printer memory.
Summary of Contents for 3110 Color Laser
