Dell 3110 Color Laser User Manual Download Page 18

Page: 18 / 451

Values:

Dell Service Tag Number

Displays Dell's service tag number.

Asset Tag Number

Displays the printer's asset tag number.

Printer Serial Number

Displays the printer's serial number.

Memory Capacity

Displays the memory capacity.

Processor Speed

Displays the processing speed.

Printer Revision Levels Firmware Version

Displays the revision date (revision level).

Network Firmware Version

Displays the revision date (revision level).

Printer Jobs

The

Printer Jobs

menu contains information on the

Job List

and

Completed Jobs

pages. These pages

show the details of the status regarding each protocol or the print jobs.

Job List

Purpose:

To confirm the print jobs that are being processed. Click the

Refresh

button to update the screen.

Values:

Displays the job id.

Job Name

Displays the file name of the job being printed.

Owner

Displays the job owner's name.

Host Name

Displays the name of the host computer.

Job Status

Displays the status of the job being printed.

Host I/F

Displays the status of the host interface.

Job Submitted Time

Displays the date the print job was submitted.

Completed Jobs

Purpose:

To check the completed print jobs. Up to the last 22 print jobs are displayed. Click the

Refresh

button to

update the screen.

Values:

Summary of Contents for 3110 Color Laser




































































































































































































































































































































































































































































Search results

Summary of Contents for 3110 Color Laser

Reviews:

Related manuals for 3110 Color Laser

Brands by name

Popular brands

Dell 3110 Color Laser, User Manual

Search results

Summary of Contents for 3110 Color Laser

Reviews:

Related manuals for 3110 Color Laser

Brands by name

Popular brands