Dell 3110 Color Laser User Manual Download Page 63

Page: 63 / 451

1 Parallel port

2 USB port

A USB/parallel port requires a USB/parallel cable. Be sure to match the USB/parallel symbol on the cable to
the USB/parallel symbol on the printer.

Plug the other end of the cable into a USB or parallel port on the back of the computer. For a USB cable, do
not plug it into the USB keyboard.

Turn On the Printer

Plug one end of the printer power cable into the socket at the back of the printer and the other end
into a properly grounded outlet.

Summary of Contents for 3110 Color Laser




































































































































































































































































































































































































































































Search results

Summary of Contents for 3110 Color Laser

Reviews:

Related manuals for 3110 Color Laser

Brands by name

Popular brands

Dell 3110 Color Laser, User Manual

Search results

Summary of Contents for 3110 Color Laser

Reviews:

Related manuals for 3110 Color Laser

Brands by name

Popular brands