Dell 3110 Color Laser User Manual Download Page 263

Page: 263 / 451

Check the IP address assigned by AutoIP on the printer.

e.g.: 168.254.1.1

Check that the IP address on your computer is assigned by DHCP.

Open Dell Printer Configuration Web Tool using WEB browser.

e.g.: http://168.254.1.1/

Change the wireless setting of the printer on Dell Printer Configuration Web Tool.

Reboot the printer.

Restore the wireless setting on your computer.

NOTE:

If your computer provides a wireless LAN adapter tool, change the wireless settings using this

tool. Or you can change the wireless settings using the tool provided by the operating system. See the
instructions below.

For Windows XP and Windows Server 2003:

Select

Network Connections

from Control Panel.

Right-click

Wireless Network Connection

and select

Properties

Select

Wireless Network

tab.

Click

Advanced

Do either of the following:

When wireless ad-hoc mode is set to the printer:

Select

Computer to Computer (ad hoc) networks only

and close the

Advanced

dialog box.

When wireless infrastructure mode is set to the printer:

Select

Access point (Infrastructure) networks only

and close the

Advanced

dialog box.

Select the setting that you send to the printer in the list in

Preferred Network

group.

Click

Move up

to move the setting to the top of the list.

Click

to close the

Property

dialog box.

NOTE:

When your operating system is earlier than Windows 2000, create settings according to

the manual of the wireless setting tool provided by your wireless device manufacturer.

For Windows Vista:

Summary of Contents for 3110 Color Laser




































































































































































































































































































































































































































































Search results

Summary of Contents for 3110 Color Laser

Reviews:

Related manuals for 3110 Color Laser

Brands by name

Popular brands

Dell 3110 Color Laser, User Manual

Search results

Summary of Contents for 3110 Color Laser

Reviews:

Related manuals for 3110 Color Laser

Brands by name

Popular brands