Maintaining Your Printer
Periodically your printer requires you to complete certain tasks to maintain optimum print quality. If several
people are using the printer, you may want to designate a key operator to maintain your printer. Refer
printing problems and maintenance tasks to this key operator.
Determining the Status of Supplies
Conserving Supplies
Ordering Supplies
Storing Print Media
Storing Consumables
Replacing Print Cartridges
Replacing the Fuser
Replacing Separator Rollers
Replacing the Belt Unit
Adjusting Color Registration
Determining the Status of Supplies
If your printer is connected to the network, the
Dell Printer Configuration Web Tool
can provide instant
feedback on remaining toner levels. Type the printer IP address in your Web browser to view this
information. To use the E-Mail Alert Setup feature that notifies you when the printer requires new supplies,
type your name or the name of the key operator in the e-mail list box.
On the operator panel, you can also confirm the following:
Any supply or maintenance items that require attention replacing (However, the printer can only
display information about one item at a time.)
Amount of toner remaining in each print cartridge
Conserving Supplies
You can change several settings in your software program or on the operator panel to conserve print
cartridge and paper.
Summary of Contents for 3110 Color Laser
