Manual Address
Sets the IP address.
Manual
Gateway
Address
Sets the gateway address.
DNS
DNS Domain Name *
1
Specifies the domain name of the domain name server. Up to
255 alphanumeric characters, periods, and hyphens can be
used. If you need to specify more than one domain name,
separate them using a comma or semicolon.
IPv4
Get DNS Server
Address from
DHCP
Select the check box to get the DNS server address
automatically from the DHCP server.
Manual DNS
Server Address
Sets the DNS server address.
IPv6
Get DNS Server
Address from
DHCPv6-lite
Select the check box to get the DNS server address
automatically from the DHCPv6-lite server.
Manual DNS
Server Address
Sets the DNS server address.
DNS Dynamic Update
(IPv4) *
1
Select the check box to enable dynamic updates to DNS.
DNS Dynamic Update
(IPv6) *
1
Select the check box to enable dynamic updates to DNS.
Auto Generate Search
List *
1
Select the check box to automatically generate the search list.
Search Domain Name *
1
Specifies the search domain name. Up to 255 alphanumeric
characters, periods, and hyphens can be used. If you need to
specify more than one domain name, separate them using a
comma or semicolon.
Time-out *
1
Specifies the time-out period between 1 and 60 seconds.
Priority to IPv6 DNS
Name Resolution
Select the check box to enable the DNS Name Resolution
feature.
WINS*
1
WINS Mode
Select the check box to get the WINS server address
automatically from the DHCP server.
WINS Primary Server
Sets WINS server address in the
nnn.nnn.nnn.nnn
format. Each
section of
nnn.nnn.nnn.nnn
is a value between 0 and 254. Note
that values 127 and 224 to 254 are not valid for the first three-
digits.
WINS Secondary Server
Sets a back up WINS server address in the
nnn.nnn.nnn.nnn
format. Each section of
nnn.nnn.nnn.nnn
is a value between 0
and 254. Note that values 127 and 224 to 254 are not valid for
the first three-digits.
Summary of Contents for 3110 Color Laser
