Daikin D-BACS, Design Manual

Page: 61 / 376

44 6.4 Setting Group No. for Centralized Control
Fundamental of DIII-NET
6.4.3 Simplified Remote Controller <BRC2C51>
1. Remove the cover of remote controller.
2. While in normal mode, press the [BS6] BUTTON (field set) to enter the FIELD SET MODE.
3. Select the mode No. [00] with [BS2] BUTTON (temperature setting
▲
) and [BS3] BUTTON (temperature setting
▼
).
4. Select the group No. with [BS9] BUTTON (set A) and [BS10] BUTTON (set B). (Group Nos. increase in the order of 1-
00, 1-01......1-15, 2-00,.....4-15. However, the unified ON/OFF controller displays only group No. set within the range
of control.)
5. Press [BS7] BUTTON (set/cancel) to set group No.
6. Press [BS6] BUTTON (field set) to return to the NORMAL MODE.
<Cautions>
„
Even in the system without remote control, connect the remote controller once to set group No. for central control
equipment and remove the remote controller after setting.
„
When you set the group No., be sure to supply the power to the central remote controller, the unified ON/OFF
controller and the indoor unit.
<Example of group setting>
Cautions
When the power is supplied, all the display appears once on the remote controller and then the display changes to [88] for
about one minute and during that time the remote controller does not function. However, this is not a malfunction of
remote controller.