Daikin D-BACS, Design Manual

Page: 177 / 376

160 3.4 Part names and Functions (DST301BA61)
Control Devices
Names and Functions of Operating Section (Fig. 1, 2)
3P124623-5C
1
UNIFIED OPERATION BUTTON “ ”
12
TIME NO. BUTTON “ ”
Press this button to perform the unified operation
regardless of the No. of programmed time.
Press this button to select time No..
2
UNIFIED STOP BUTTON “ ”
13
CLOCK ADJUSTING BUTTON “ ”
Press this button to perform the unified stop
regardless of the No. of programmed time.
Press this button to set the present time.
3
OPERATION LAMP (RED)
14
PROGRAMMING START BUTTON “ ”
The light turns on during the operation of the indoor
unit.
Press this button to set or check the No. of
programmed time. Press it again after you are
through with the program.
4
DISPLAY “ ” (TIME NO.)
15
BUTTON FOR SELECTING DAYS OF A WEEK
“
”
Displays the time No. only when used in conjunction
with the central remote controller.
Press this button to select the day of the week.
5
DISPLAY “PROGRAM START.”
(PROGRAMMING START)
16
HOUR/MINUTE BUTTON “ ”
The light turns on when the timer is programmed.
Press this button to adjust the present time and the
programmed time.
6
DISPLAY “
OFF
” (HOLIDAY SETTING)
17
TIMER ON BUTTON “ ”
Lights above the day of the week set as holiday.
The operation controlled by timer is not available on
that day.
Press this button to set the present time and the
programmed time.
7
DISPLAY “ — ” (SETTING OF DAYS OF A WEEK)
18
HOLIDAY SETTING BUTTON “ ”
Flashes below the day of the week programmed. Press this button to set holidays.
8
DISPLAY “ ” (MALFUNCTION CODE)
19
BUTTON FOR COPYING PROGRAM OF
PREVIOUS DAY “
”
Displays the contents of malfunction during the stop
due to malfunction. Use this button to set the No. of programmed time
same as that of the previous day.
9
DISPLAY “ ” (PRESENT TIME)
20
PROGRAM CANCELING BUTTON “ ”
Displays the present day of the week and time.
Use this button to set the programmed time to
cancel. The display shows
“ – ; – – ”.
10
DISPLAY “ ” (PROGRAMMED TIME OF
SYSTEM START)
(Note)
1. Please note that all the displays in the figure appear
for explanation purpose or when the cover is open.
Displays the time programmed to start.
11
DISPLAY “ ” (PROGRAMMED TIME OF
SYSTEM OFF)
Displays the time programmed to stop.