Daikin D-BACS Design Manual Download Page 375

Page: 375 / 376

358

2.7 <KRP1B61 / KRP1B56, 59 / KRP1C3> Adaptor for Wiring

Adaptor

KRP1B56, 59

KRP1C3

•

Refer to the WIRING DIAGRAM attached to the indoor unit before attempting to wire.

[Make sure wires to units do not pass over the PC board when wiring]

•

Wire the adaptor to the indoor unit as described below.

Indoor unit PC board

(FXZQ,FXD(Q) : X16A)

Fetching the operation display signal

•

Attaching an hour meter

Output is generated at the contact while
the compressor is running.

•

Fan ON display

Output is generated at the contact while the
fan is running.

Carrying capacity
20mA and above
or 1.2A and below

AC 220
~240V

HM: Hour meter
(Field supplied part)

OL: Operation lamp
(Field supplied part)

Example:

Summary of Contents for D-BACS

























































































































































































































































































































































































Search results

Summary of Contents for D-BACS

Reviews:

Daikin D-BACS, Design Manual, Page: 375 / 376

Search results

Summary of Contents for D-BACS

Reviews: