Daikin D-BACS Design Manual Download Page 60

Page: 60 / 376

6.4 Setting Group No. for Centralized Control

Fundamental of DIII-NET

6.4.2 Wireless Remote Controller <BRC4C, 7C, 7E>

1. When in the normal mode, push “

” button for 4 seconds or more, and operation then enters the “field set

mode.”

2. Set mode No. “00” with “

” button.

3. Set the group No. for each group with “

” “

” button (advance/backward).

4. Enter the selected group numbers by pushing “

” button.

5. Push “

” button and return to the normal mode.

Summary of Contents for D-BACS

























































































































































































































































































































































































Search results

Summary of Contents for D-BACS

Reviews:

Related manuals for D-BACS

Brands by name

Popular brands

Daikin D-BACS, Design Manual

Search results

Summary of Contents for D-BACS

Reviews:

Related manuals for D-BACS

Brands by name

Popular brands