Daikin D-BACS Design Manual Download Page 341

Page: 341 / 376

324

1.7 Ai Unit (DAM101A51)

Adaptor

5. Once all settings are complete, Replace the removed cover in 2-1 using the screws.

Cutting JP6

OFF
OFF
ON
OFF

DS3

DS4

The following settings should be done for the factory default DS1 to DS4 settings.

OFF
OFF
OFF (Set not to use multi - purpose sensors.)
ON

The " " symbol indicates switch knob position.

Set to address 1 - 00

When using multi-purpose sensors, cut jumper JP6 on the printed board using nippers, etc.

∗

: When using multi-purpose sensors, set DS3 at the same time as these settings are being done.

∗

: Be sure to get rid of line cuttings when cutting the jumper. Failing to remove them may cause the

printed board to malfunction.

DS1

DS2

Summary of Contents for D-BACS

























































































































































































































































































































































































Search results

Summary of Contents for D-BACS

Reviews:

Daikin D-BACS, Design Manual, Page: 341 / 376

Search results

Summary of Contents for D-BACS

Reviews: