About Sub-address
A Sub-address is used to differentiate between systems on the
same ISDN line and is primarily used in European Countries.
How to Specify a Sub-address
To specify an ISDN sub-address or its LAN equivalent extension
address (TCS-4), add a star (*) after the number and then enter the
sub-address/extension address.
Examples:
12345678*10
12345678*abcd
Syntax:
<number>*<Sub-address/extension address/MCU
password>
NOTE:
When dialing IP via a gateway, the number behind the star
(*) on IP might be interpreted as an extension address.
About Extension Address
When dialing via a gateway, a LAN equivalent extension address
(or TCS-4) is used to differentiate between systems on the LAN.
About MCu Password
When calling an external MCU (Multipoint Conference Unit) which
requires a password (TSC-1), the password can be added after the
star (*). If no password is specified at the time of dialing, the user
will be asked to enter the password after connecting to the MCU.
96
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
Appendices
