manualshive.com logo in svg

Cisco TelePresence 1000 MXP, Administrator'S Manual

Share
Download
Cisco TelePresence 1000 MXP Administrator'S Manual Download Page 88

MENu ADDRESS

SETTINGS DESCRIPTION

INFORMATION

PRODuCT

Control Panel >
Installation >

WIZARD

INSTALLATION WIZARD

The Installation Wizard runs automatically when you install the system and you can start it anytime from 

the Installation menu in the Control Panel. Using the Installation Wizard is convenient when installing 

video systems when you have both Border Controller and TMS (Cisco TelePresence Management Suite ) 

available. You only have to register to the TMS Server and the rest is configured by the network. 

The Installation Wizard takes you through the following steps:

8. 

Welcome page

9. 

Select 

Language

10. 

Enter 

System Name

11. 

Enter 

Software Option Keys

12. 

Enter 

IP Settings

• 

Obtain IP Address Automatically 

• 

Static IP Address (address, subnet, gateway)

13. 

Enter 

SIP Settings

14. 

Enter External Management settings

• 

On: Enter information for your 

TMS server

 (address, path)

• 

Off: Select from the list: 

• 

Gatekeeper

 and enter the gatekeeper settings

• 

Call Manager

 and enter the call manager settings

• 

Direct

15. Finish

 the wizard. The system will automatically 

restart

 the system.

FINISH: 

Press the Finish button to save the changes and restart the system.  

A message will appear: “

Attention: The settings are now saved. A restart of the 

system is required. Do you want to restart now?

”  

Press 

OK

 to restart or press 

Cancel

 to return to the Installation menu without restarting.

CANCEL: 

Press the Cancel button to exit the Installation Wizard without saving any changes.  

A message will appear: “

Attention: The settings are not saved. Do you want to exit 

the installation wizard without saving?

”   

Press 

OK

 to exit or press 

Cancel

 to return to the Installation wizard.

About the wizard
Press Next to continue; Cancel to exit; Previous to go back; 

Finish to finish the wizard.
All the settings in the Installation Wizard are also found in the 

Control Panel Library.
To make the changes take effect the video system needs to 

be restarted. 

All

88

Cisco TelePresence MXP Series

Administrator guide

D14791.01 MXP Series Administrator Guide F90, August

 2011.  

Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.

www.cisco.com

Contents

Contact us

Introduction

The menu structure

The settings library

Getting started

Appendices

The settings library

Summary of Contents for TelePresence 1000 MXP













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands