manualshive.com logo in svg

Cisco TelePresence 1000 MXP, Administrator'S Manual

Share
Download
Cisco TelePresence 1000 MXP Administrator'S Manual Download Page 38

MENu ADDRESS

SETTINGS DESCRIPTION

INFORMATION

PRODuCT

Control Panel > 
General > 

SCREEN SETTINGS

MONITOR COLOR G

1700 MXP: Use the arrow keys to adjust the Monitor Color Green (Value: 0 - 255)

This setting applies to 1700 MXP 

See  

comment

Control Panel > 
General > 

SCREEN SETTINGS

MONITOR COLOR B

1700 MXP: Use the arrow keys to adjust the Monitor Color Blue (Value: 0 - 255)

This setting applies to 1700 MXP 

See  

comment

Control Panel > 
General > 
Screen Settings > 

VIDEO OUT

TV SINGLE

Applies to Video Out 1 (S-video) and Video Out 3 (composite).

OFF: 

The TV Single output is Off. 

ON: 

The TV Single output is On.

6000

Control Panel > 
General > 
Screen Settings > 

VIDEO OUT

TV DuAL

Applies to Video Out 2 (S-video) and Video Out 4 (composite).

OFF: 

The TV Dual output is Off. 

ON: 

The TV Dual output is On.

6000

Control Panel > 
General > 
Screen Settings > 

VIDEO OUT

VGA DuAL

Applies to the second DVI output.

OFF: 

The VGA Dual output is Off.

ON: 

The VGA Dual output is On.

6000 MXP: DVI output is marked DUAL
3000 MXP, 990/880/770 MXP: the DVI-I out has no label as 

the menu setting on these systems allows the DVI-I out to be 

either single or dual output.

6000

Control Panel > 
General > 
Screen Settings > 

VIDEO OUT

TV MONITOR FORMAT

For wide screen monitors only.

NORMAL: 

Output is optimized for normal TV monitors (4:3)

WIDE: 

Output is optimized for wide TV monitors (16:9). To fully leverage your wide screen display, 

activate the Native 16:9 format by setting the TV Monitor Format to Wide. 

NOTE:

 You should only change this setting if your TV monitor 

is a wide screen (16:9) monitor or projector. All composite- 

and S-video output formats will then be optimized for Wide 

Screen TV monitors.
N

OTE

! If both TV Monitor Format and VGA Monitor Format 

are set to Normal, the system will skip the 1+3 layout, which 

is not beneficial for 4:3 monitors.

All which 

supports 

wide 

screen

38

Cisco TelePresence MXP Series

Administrator guide

D14791.01 MXP Series Administrator Guide F90, August

 2011.  

Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.

www.cisco.com

Contents

Contact us

Introduction

The menu structure

The settings library

Getting started

Appendices

The settings library

Summary of Contents for TelePresence 1000 MXP













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands