199 AV1
:
External input for the TANDBERG/LOEWE monitor.
2nd monitor
:
The second monitor of your video communication
system. The second monitor is normally placed on the right
side of the first monitor.
4CIF
:
4 times CIF, 704x576 pixels
4SIF
:
4 times SIF, 704x480 pixels
A
AACLD
: Advanced Audio Coding Low Delay
Access code
: Use Access code to password protect outgoing
calls.
Accessories box
: The cabinet contains the following: W.A.V.E.
camera, table microphone, remote control and tracker and
documentation.
Accessories drawer
: See Accessories box
AES
: Strong encryption. (Advanced Encryption Standard)
AGC
: Automatic Gain Control. Maintains the audio signal level
at a fixed value by attenuating strong signals and amplifying
weak signals. Very weak signals, i.e. noise alone, will not be
amplified.
Alert speaker
: The internal speaker will warn you of an incoming
call even though the monitor may not be switched on.
Audio call
: Audio call equals a telephone call. You can make a
call with the video system with audio only.
Audio input 4
: Intended for connection to an external
microphone amplifier or an external fixed mixer.
Audio input 5
: Intended for connection to external playback
devices (or to telephone add-on hybrids).
Audio input 6
: Intended for connection to a VCR or DVD player
or other external playback devices.
Audio out 1
: Intended for connection to TANDBERG Natural
Audio, televisions or audio amplifiers.
Audio out 2
: Intended for connection to audio recording
equipment (or to a telephone add-on hybrid).
Audio out 3
: Intended for connection to a VCR or other
recording equipment.
Auto-display snapshot
: Sent and received snapshot will
automatically appear on full screen display.
Auto answer
: The system will automatically answer all incoming
calls when idle.
Automatic DuoVideo
: DuoVideo Mode is put to Auto. When
starting a presentation, DuoVideo will start automatically (if
possible).
B
Bandwidth
: Decides the quality of the video call. High
bandwidth gives high quality.
C
Call Control Data Triggered
: Uses TxData, RxData and clock
signals only. Use Data Triggered when no handshake signal is
available.
Call control Leased Line
: Is a non-dialing protocol and should
be used when two systems are connected in a point-to-point
connection. Use Leased Line when the handshaking signals
DTR and CD are available.
Call control Manual
: Should be used when no handshake
signals are available, and the external equipment requires a
constantly connected line.
Call control RS366 Dialing
: The only dialing protocol and would
normally be used together with network clocking RS449/V35
Compatible when the external system uses RS2366 ports.
Call status
: Comprehensive information about the call listing
transmitted and received audio/video/data information.
Camera tracking
: Voice Activated Camera Positioning - the
camera will automatically view the current speaker.
Camera tracking mode
: Voice Activated Camera Positioning -
the camera will automatically view the current speaker.
Chair control
: Enables one participant to control the meeting
by selecting which of the conference participants that is to be
broadcasted to the other participants.
Channel status
: Comprehensive information about the call
progress listing the numbers called, and if an error occurs a
cause code is displayed.
CIF
: Common Intermediate Format, 352x288 pixels
Closed Captioning
: Text chat.
Codec
: The Codec is the heart of the system. The main task
for the Codec is the compression of outgoing video, audio and
data, the transmission of this information to the far end, and the
decompression of the incoming information.
Continuous Presence
: See Split Screen
Control Panel
: The Control Panel is found in the Menu.
CSu
: Channel Service Unit
D
Daisy-chaining
: Use of several cameras in a video conference.
Dataport
: The system provides two standard RS 232 data ports
to allow a computer to be connected for data transfer and
control purposes.
Dataport 1
: A standard RS 232 data port to allow a computer to
be connected for data transfer and control purposes.
Dataport 2
: Dedicated to the main camera and will not be
available in standard configuration.
DES
: Encryption. (Data Encryption Standard)
DHCP
: Dynamic Host Configuration Protocol.
Diagnostics
: Allows testing of individual system components
and displays the current system settings.
Digital ClarityTF
: Participants enjoy presentations of
exceptionally high quality resolution video.
Disconnect site
: As a Chairman, you get the option Disconnect
site. Disconnect site allows you to disconnect any participant in
the conference.
Do Not Disturb
: When Do Not Disturb is active the system will
not accept any incoming calls.
Document Camera
: A document camera is an additional camera
that is used for showing text, diagrams as well as physical
objects.
DownspeedingTF
: If channels are dropped during a video
meeting, the connection is automatically maintained without
interruption.
Dual monitor
: The second monitor
Dual monitor system
: A video conference system with two
monitors.
DuoVideoTF
: Allows participants at the far end to
simultaneously watch a presenter on one screen and a live
presentation on the adjoining screen.
E
E.164 Alias
: The E.164 address of the system. Equivalent to a
telephone number, sometimes combined with access codes.
The system will not register with the Gatekeeper if the E164
alias is not set.
E1
: Network type, 30 channels. Default for PAL versions.
Echo canceller
: Continuously adjusts itself to the audio
characteristics of the room and compensates for any changes
it detects in the audio environment.
Echo control
: When set to On the far end is prevented to hear
Glossary
168
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
Appendices
