MENu ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODuCT
Control Panel >
General >
SOFTWARE OPTIONS
OPTIONS INSTALLED
This section shows you which options are currently installed on your system. To activate a new option,
you must have a valid option key.
NOTE:
After entering the new option key you must restart the system
to activate the new option.
The following options are available:
•
No option
•
Presenter
•
Mul Presenter
•
Bandwidth options
MultiSite:
The TANDBERG MultiSite feature (using an
embedded MCU) enables you to setup multipoint calls with
three or more participants - by video and/or telephone.
Presenter:
The TANDBERG Natural Presenter Package
(NPP) allows you to bring your presentations to life using
PCs, document cameras and video (also mentioned as dual
stream). Bandwidth decides the quality of the video call. High
bandwidth gives high quality.
All
Control Panel >
General >
SOFTWARE OPTIONS
SERIAL NO
Shows the serial number of the video system.
The Serial Number format is xx.xxxxx or xxAxxxxx.
The Serial Number is also found on a sticker on the system.
It is essential for identifying the system when it comes to
service contracts or other support activities.
All
Control Panel >
General >
SOFTWARE OPTIONS
CuRRENT OPTION kEy
Shows the current option key.
All
Control Panel >
General >
SOFTWARE OPTIONS
CuRRENT BANDWIDTH kEy
Shows the current bandwidth key.
All
Control Panel >
General >
SOFTWARE OPTIONS
NEW OPTION kEy
To activate a new option, enter the new option key and restart the system.
If the key is invalid, the original key will be used.
Please contact your TANDBERG representative to order a
new option.
All
Control Panel >
General >
SOFTWARE OPTIONS
NEW BANDWIDTH kEy
To activate a new bandwidth, enter the new bandwidth key and restart the system.
If the key is invalid, the original key will be used.
Please contact your TANDBERG representative to order
additional bandwidth.
All
Control Panel >
General >
DATE & TIME SETTINGS
TIME ZONE
Displays the current time and date. Select the correct time zone for the location of your system.
•
GMT -01:00 to GMT -12:00
•
GMT Greenwich Mean Time
•
GMT +01:00 to GMT +14:00
GMT - Greenwich Mean Time
All
Control Panel >
General >
DATE & TIME SETTINGS
DATE FORMAT
Choose between DD/MM/YY, MM/DD/YY, or YY/MM/DD as the preferred date format.
All
40
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
The settings library
