MENu ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODuCT
Control Panel >
Network >
LAN Settings >
SNMP SETTINGS
SNMP COMMuNITy
SNMP Community names are used to authenticate SNMP requests. SNMP requests must have a
‘password’ (case sensitive) in order to receive a response from the SNMP Agent in the codec.
The default password is “
public
”
If you have the Cisco TelePresence Management Suite
(TMS) you must make sure the same SNMP Community is
configured there too.
NOTE!
The SNMP Community (‘password’) is case sensitive.
All
Control Panel >
Network >
LAN Settings >
IP SERVICES
HTTP
HTTP (Hypertext Transfer Protocol) is a web-interface for system management, call management such
as call transfer, diagnostics and software uploads
ON:
The HTTP protocol is enabled.
OFF:
The HTTP protocol is disabled.
HTTP - Hypertext Transfer Protocol
All
Control Panel >
Network >
LAN Settings >
IP SERVICES
HTTPS
HTTPS (Hypertext Transfer Protocol over Secure Socket Layer) is a Web protocol that encrypts and
decrypts user page requests as well as the pages that are returned by the Web server
ON:
The HTTPS protocol is enabled.
OFF:
The HTTPS protocol is disabled.
HTTPS - Hypertext Transfer Protocol Secure over Socket
Layer
All
Control Panel >
Network >
LAN Settings >
IP SERVICES
DDDP
Turns support for AMX’s Dynamic Device Discovery Protocol (DDDP) On or Off.
ON:
If set to On the system will transmit a Beacon string identifying the system in random intervals
between 30 and 60 seconds. The Beacon is transmitted as a UDP packet to 239.255.250.250 on
port 9131.
OFF:
The DDDP is disabled.
DDDP - Dynamic Device Discovery Protocol from AMX
6000
3000
Control Panel >
Network >
LAN Settings >
IP SERVICES
NTP IP
The NTP (Network Time Protocol) is used to synchronize the time of the system to a reference time
server (the NTP time server). This is a requirement for proper operation if the H.235 authentication
is implemented. The system will use the time to timestamp messages transmitted to Gatekeepers or
Border Controllers that requires H.235 authentication. It is also used for timestamping Placed Calls,
Missed Calls and Received Calls.
AuTO:
When set to Auto, the video system will use the NTP address provided by the DHCP server. The
server will be queried every 24th hour.
MANuAL:
When set to manual, you will have to enter the IP address of the NTP server manually. The
server will be queried every 24th hour.
NOTE!
The NTP time server synconization is a requirement
for proper operation if the H.235 authentication is
implemented.
NTP - Network Time Protocol
H.235 - Provides authentication, privacy and integrity for
H.323 based systems.
All
Control Panel >
Network >
LAN Settings >
IP SERVICES
IP ADDRESS
If the NTP IP mode is set to Manual; enter the IP Address or DNS name for obtaining the date and time
information from the NTP time server.
Example:
IP Address: 10.0.0.1
DNS Name: time.eu.company.int
All
82
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
The settings library
