MENu ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODuCT
Control Panel >
Buttons >
DIAGNOSTICS
DETAILED CALL STATuS
The Detailed Call Status menu provides detailed information on Audio, Video and DuoVideo in regards to
Packet Loss, jitter and Packets dropped.
The menu has two columns, one for transmitted and one for received audio/video/data information.
The Diagnostics menus allows testing of individual system
components and displays the current system settings.
All
Control Panel >
Buttons >
DIAGNOSTICS
SySTEM SELFTEST
The system performs a check to determine internal hardware integrity.
System Selftest is useful when you want to check if your network connection is active.
The Diagnostics menus allows testing of individual system
components and displays the current system settings.
All
Control Panel >
Buttons >
DIAGNOSTICS
VIEW ADMINISTRATOR SETTINGS
This window displays all the system settings. The system settings available will vary depending on what
software options are installed.
Use the Arrow keys on the remote control to scroll through the list.
The Diagnostics menus allows testing of individual system
components and displays the current system settings.
All
Control Panel >
Buttons >
DIAGNOSTICS
IP ADDRESS CONFLICT CHECk
The system will give a warning if there is an IP conflict.
To initiate the check you select
IP Address Conflict Check
from the Diagnostics menu.
The Diagnostics menus allows testing of individual system
components and displays the current system settings.
All
Control Panel >
Buttons >
Diagnostics >
WARNINGS
IP NETWORk QuALITy WARNINGS
•
The system is experiencing 5% or higher, packet loss in the IP network. This will affect the quality of
the call.
•
The system is experiencing high jitter (i.e. 200 ms or higher) in the IP network. This may affect the
quality of the call.
•
The system is dropping IP packets due to latency in the network. This may affect the quality of the call.
Any warnings registered by the system will be displayed in
the Warnings menu in the bottom of the screen. Go to the
Diagnostics menu and open a warning in the list to get more
information about the warning.
All
Control Panel >
Buttons >
Diagnostics >
WARNINGS
H.323 GATEkEEPER WARNINGS
•
Could not register to the Gatekeeper.
•
The Gatekeeper rejected the registration attempt. Another system is already registered with the same
alias or H.323 ID.
•
The max capacity on the Gatekeeper is reached. Registration failed.
•
Tried to register to the Gatekeeper without a valid alias. Registration failed.
•
The system is not allowed to register with this Gatekeeper.
•
Can not find the Gatekeeper. Check the Gatekeeper configurations on the system.
Any warnings registered by the system will be displayed in
the Warnings menu in the bottom of the screen. Go to the
Diagnostics menu and open a warning in the list to get more
information about the warning.
All using a
Gatekeeper
Control Panel >
Buttons >
Diagnostics >
WARNINGS
ISDN-BRI WARNINGS
•
ISDN is enabled on BRI line x, but the line is not connected. Please check your network connection or
disable the line. (101)
•
There is something wrong with ISDN-BRI line x. Please check your network connection. (102)
Any warnings registered by the system will be displayed in
the Warnings menu in the bottom of the screen. Go to the
Diagnostics menu and open a warning in the list to get more
information about the warning.
All with
ISDN-BRI
91
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
The settings library
