Apply your own logo using a web browser
Open a Web Browser and type
http://<IP-address of your local system>
•
Select Endpoint Configuration
> Files
•
Locate your <logo.jpg> file and press Upload
•
Restart the system
Apply your own logo using a DOS
window
Open a DOS window and go to the folder where your
logo is located.
•
Type:
ftp <IP-address of your local
system>
•
Go to the user folder: type
cd user
•
Upload your logo: type
put <logo.jpg>
.
•
Restart the system
Apply your own logo
You can apply your own logo to be displayed on the video system. The
new logo will be displayed the next time you restart your system.
Recommended maximum size is: 704 × 576 pixels and the file format is
jPG.
NOTE!
If the file is too large, the logo will not be displayed.
NOTE:
The IP addresses used in the examples are for educational
purpose. To find the IP Address of your system check the System
Information in the Diagnostics menu.
109
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
Appendices
