MENu ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODuCT
Control Panel >
Presentation Settings >
H.239
H.239 supports transmission of two video streams. It combines elements of DuoVideo and
Content. If H.239 is disabled you will still be able to start TANDBERG Dual Stream.
ENABLED:
Enables the H.239 protocol.
DISABLED:
Disables the H.239 protocol.
All
Control Panel >
Presentation Settings >
FORCE MAC INPuT
Use this setting if the system does not recognize MAC computers as a presentation source, it turns the
PC input for Mac computers on and off.
ON:
If set to On, the system will recognize all Mac computers, but may have problems with other
presentation sources.
OFF:
If set to Off, the system may have problems recognizing Mac computers as a presentation source.
All
Control Panel >
Presentation Settings >
HORIZONTAL ADjuST DVI
Use this setting to adjust the horizontal position on the DVI input. The default value is 128.
VALuE
< 128:
Adjusts the position to the right.
VALuE
> 128:
Adjusts the position to the left.
Control Panel >
Presentation Settings >
CALL VIDEO SOuRCE
The Call Video Source is the default video source you would prefer to use in a call. The number of
choices are dependent of what video sources are available for your system. Select the default Call Video
Source to be used in a call:
MAIN CAM:
The Main Camera (the default setting) will be used as the default call video source every
time you make a call, regardless of what the previous video source was.
DOC CAM:
The document camera will be used as the default call video source every time you make a
call, regardless of what the previous video source was.
PC:
The main PC will be used as the default call video source every time you make a call, regardless of
what the previous video source was.
AuX:
The main AUX will be used as the default call video source every time you make a call, regardless
of what the previous video source was.
VNC:
The VNC will be used as the default call video source every time you make a call, regardless of
what the previous video source was.
VCR:
The VCR will be used as the default call video source every time you make a call, regardless of
what the previous video source was.
CuRRENT:
If you set Current as the call video source, the system will start with whatever the previous
video source was.
All
48
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
The settings library
