MENu ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODuCT
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
ISDN-PRI Settings >
ADVANCED ISDN SETTINGS
PARALLEL DIAL
Parallel Dial is used when setting up bonded calls.
ON:
Channels will be dialed and connected in parallel when setting up a BONDING call.
OFF:
Channels will be dialed one by one, which may increase the dialing time.
Bonded ISDN calls - The bridging of two or more ISDN
channels to achieve higher data rates.
All with
ISDN-PRI
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
ISDN-PRI Settings >
ADVANCED ISDN SETTINGS
SEND OWN NuMBERS
ON:
The system will send its own numbers to the far end.
OFF:
The system will not send its own numbers to the far end, but please note that the network may still
send your numbers to the far end.
All with
ISDN-PRI
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
ISDN-PRI Settings >
ADVANCED ISDN SETTINGS
SENDING COMPLETE
Some PBX’s and Telco switches need to see the Sending Complete message.
ON:
The system will send the ISDN message information element Sending Complete.
OFF:
The system will not send Sending Complete. Default is “Off”
All with
ISDN-PRI
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
ISDN-PRI Settings >
ADVANCED ISDN-PRI
SETTINGS
NSF CODE VIDEO CALL
Network Service Facility (NSF) is a non-standard facility and your network provider may require a service
selection in your ISDN configuration.
ON:
Set Mode to On and enter the NSF Service Code.
OFF:
Set Mode to Off to disable the NSF Service Code.
NSF - Network Service Facility
All with
ISDN-PRI
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
ISDN-PRI Settings >
ADVANCED ISDN-PRI
SETTINGS
NSF CODE TELEPHONE CALL
Network Service Facility (NSF) is a non-standard facility and your network provider may require a service
selection in your ISDN configuration.
ON:
Set Mode to On and enter the NSF Service Code.
OFF:
Set Mode to Off to disable the NSF Service Code.
NSF - Network Service Facility
AT&T offers several digital switched services. These include
SDN with service code 1 and ACCUNET with service code 6.
For more infor see
NSF Service Codes
in
Appendices
.
All with
ISDN-PRI
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
LEASED E1/T1 SETTINGS
CALL CONTROL
Set the maximum number of channels the system may use at any Call Control.
AuTO:
When Auto is selected, the system will automatically initiate a connection as soon as it detects
that the far end tries to make a call. This mode is also commonly known as “data triggered” mode,
because the existence of certain data patterns on the line triggers a connection.
MANuAL:
When manual is selected, the user has to explicitly issue a dial command to make the system
connect to the far end system. Receiving an incoming call is not possible.
All with
leased line
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
LEASED E1/T1 SETTINGS
NETWORk INTERFACE
Indicates if the network is of type E1 (30 channels) or T1 (24 channels).
E1:
Default for PAL versions
T1:
Default for NTSC versions.
All with
leased line
70
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
The settings library
