Camera Port
Pin-outs for the camera port when using the PrecisionHD
Camera.
Camera Cable
The Edge 75/85/95 MXP system is shipped with a PC cable with
integrated audio.
The enclosed Cisco Camera Cables must be used! Do not
use other camera cables as this might cause problems with
the transfer of video signals from the PrecisionHD Camera.
Read more
Read more about the DVI (Digital Visual Interface) and DVI Cables
in the beginning of the Peripheral Equipment section.
Go to
The Digital Visual Interface (DVI)
Go to
DVI Cables - The VGA to DVI
Go to
DVI Cables - The VGA to DVI-A
Data port
The data port(s) are implemented as Data Communications
Equipment (DCE). The connectors used are female 9-pin
D-subs.
Data Port - Pin Specification
Signal Name
Direction
Pin Number
Carrier detect, CD
From DCE
1
Receive data, RXD
From DCE
2
Transmit data, TXD
To DCE
3
Data terminal ready,
DTR
From DCE
4
Signal ground, GND
-
5
Data set ready, DSR
From DCE
6
Ready to send, RTS
To DCE
7
Clear to send, CTS
From DCE
8
Ring indicator, RI
From DCE
9
Pinouts when using PrecisionHD Camera
PRI
Pinout
Pin 8
+ 12 V (presence 2.8 mA current source when
connected in daisy chain)
Pin 7
GND
Pin 6
TXD (out)
Pin 5
Video LVDS-
Pin 4
Video LVDS+
Pin 3
RXD (in)
Pin 2
GND
Pin 1
+ 12 V
Edge 95/75 MXP Interfaces and sockets,
cont...
Data port and Camera port
!
121
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
Appendices
