MENu ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODuCT
Control Panel >
Network >
ISDN > or
ISDN, External, Leased E1/T1 >
ISDN-BRI Settings >
ADVANCED ISDN SETTINGS
VALIDATE NuMBERS (MSN)
The use of MSN (Multiple Subscriber Number) enables you to attach different ISDN terminals, with
different numbers, to the same physical ISDN telephone line. If available this service can be ordered
from your telephone company.
ON:
When set to On only calls to the numbers specified in the Line Setup menus will be answered.
OFF:
When set to Off all calls will be answered.
MSN - Multiple Subscriber Number
All with
ISDN-BRI
Control Panel >
Network >
ISDN > or
ISDN, External, Leased E1/T1 >
ISDN-BRI Settings >
ADVANCED ISDN SETTINGS
PARALLEL DIAL
Parallel Dial is used when setting up bonded calls.
ON:
Channels will be dialed and connected in parallel when setting up a BONDING call.
OFF:
Channels will be dialed one by one, which may increase the dialing time.
Bonded ISDN calls - The bridging of two or more ISDN
channels to achieve higher data rates.
All with
ISDN-BRI
Control Panel >
Network >
ISDN > or
ISDN, External, Leased E1/T1 >
ISDN-BRI Settings >
ADVANCED ISDN SETTINGS
SEND OWN NuMBERS
ON:
The system will send its own numbers to the far end.
OFF:
The system will not send its own numbers to the far end, but please note that the network may still
send your numbers to the far end.
All with
ISDN-BRI
Control Panel >
Network >
ISDN > or
ISDN, External, Leased E1/T1 >
ISDN-BRI Settings >
ADVANCED ISDN SETTINGS
SENDING COMPLETE
Some PBX’s and Telco switches need to see the Sending Complete message.
ON:
The system will send the ISDN message information element Sending Complete.
OFF:
The system will not send Sending Complete. Default is “Off”
All with
ISDN-BRI
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
ISDN-PRI SETTINGS
ISDN-PRI NuMBER RANGE
Enter the range of numbers for your ISDN-PRI line. If these numbers are programmed and MSN is On,
only calls to these numbers will be answered.
See also
Validate numbers (MSN)
in the
Advanced ISDN-PRI Settings.
All with
ISDN-PRI
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
ISDN-PRI SETTINGS
ISDN-PRI SWITCH TyPE
Select the type of ISDN-PRI switch to which your system is connected.
The ISDN-PRI Switch Type is not changed when Restoring Defaults.
Below is a list of common ISDN-PRI/T1 switches.
Type
Manufacturer
ISDN-PRI Switch
Type
ATT 4ESS
AT&T
AT&T ISDN
ATT 5ESS
AT&T, Lucent
AT&T ISDN or
National ISDN*
DMS 100
Nortel
Networks
National ISDN
DMS 250
Nortel
Networks
National ISDN
All with
ISDN-PRI
68
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
The settings library
