MENu ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODuCT
Control Panel >
Network >
LAN Settings >
H.323 SETTINGS
H.323 CALL SETuP
H.323 Call Setup defines whether to use a Gatekeeper, Call Manager or Direct calling.
GATEkEEPER:
The system will use a Gatekeeper to make a H.323 call. When you select this option the
Gatekeeper Settings menu is enabled for configuration.
CALL MANAGER
: The system will use a Call Manager to make a H.323 call. When you select this option
the Call Manager Settings menu is enabled for configuration.
DIRECT:
An IP-address must be dialled in order to make a H.323 call. The system will not use a
Gatekeeper or Call Manager
All
Control Panel >
Network >
LAN Settings >
H.323 SETTINGS
H.323 PREFIX
When dialing a number prefixed with digits specified by H.323 Prefix, and with Network set to Auto, an
H.323 call will be placed.
Example: If H.323 Prefix is set to “
555
” and Network is set to
Auto
, then dialing “
55582
” will select
H.323.
All
Control Panel >
Network >
LAN Settings >
H.323 Settings >
GATEKEEPER SETTINGS
E.164 ALIAS
When using a Gatekeeper, the system will send a message to the Gatekeeper containing both the E.164
Alias and the H.323 ID of the system.
This is the E.164 address of the system, according to the numbering plan implemented in the
Gatekeeper. The E.164 Alias is equivalent to a telephone number, sometimes combined with access
codes.
E.164 Alias can have a maximum of 15 digits and valid characters are 0–9, * and #.
Example:
90476159
E.164 is an ITU-T recommendation which defines the
international public telecommunication numbering plan used
in the public switched telephone networks and some other
data networks.
Control Panel >
Network >
LAN Settings >
H.323 Settings >
GATEKEEPER SETTINGS
H.323 ID
When using a Gatekeeper, the system will send a message to the Gatekeeper containing both the E.164
Alias and the H.323 ID of the system.
The H.323 ID of the system may be specified here. The System Name is used if no H.323 ID is entered.
Example: “
Alice Wonderland
”, “
System 01
”
H.323 is an umbrella recommendation from the ITU-T, that
defines the protocols to provide audio-visual communication
sessions on any packet network.
Control Panel >
Network >
LAN Settings >
H.323 Settings >
GATEKEEPER SETTINGS
DISCOVERy
AuTO:
The system will automatically try to register to any available Gatekeeper. If a Gatekeeper
responds to the request sent from the codec within 30 seconds this specific Gatekeeper will be
used. This requires auto discovery on the Gatekeeper as well. If no Gatekeeper responds, the
system will not use a Gatekeeper for making H.323 calls and hence an IP-address must be specified
manually.
MANuAL:
The system will use a specific Gatekeeper identified by the Gatekeeper’s IP-address.
All
75
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
The settings library
