MENu ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODuCT
Control Panel >
General >
DATE & TIME SETTINGS
TIME FORMAT
Select 12h or 24h time format.
All
Control Panel >
General >
DATE & TIME SETTINGS
DAyLIGHT SAVINGS
ON:
Moves the time one hour ahead.
OFF:
Moves the time one hour back.
All
Control Panel >
General >
MULTIPOINT CALL OPTIONS
MuLTIPOINT CALL SETTINGS
You can make multipoint calls using the built-in MultiSite* on your system, or by using the external
Multiway
TM
** solution.
DISABLE MuLTIPOINT CALLS:
When Disable Multipoint Calls is selected, this means you have no
MultiSite or MultiWay possibilities. You can still add another call. The ongoing call will be put On Hold
and you can Swap between the two calls. Only one call can be put on hold at the time.
uSE BuILT-IN MuLTISITE
: The TANDBERG MultiSite (using a built-in MCU) enables you to setup a
multipoint call - by video and/or telephone. MultiSite is an optional feature.
uSE EXTERNAL MuLTIWAy
: The TANDBERG Multiway (using an external MCU) enables you to setup
a multipoint call - by video and/or telephone. Multiway is available through a Gatekeeper and an
external MCU. All participants can invite another participant into the conference. Multiway is not
supported when Kiosk Mode is set to On.
MuLTIWAy uRI
: When
Use external Multiway
is enabled you must enter the Multiway URI. For calling
Multiway on SIP the SIP prefix must be added to the URI for the endpoint who initiates the Multiway
call.
Example of an URI:
Example of an URI with SIP prefix: sip:
MCU is short for Multipoint Conference Unit, a device used
to connect multiple audio and video sites in one or more IP,
ISDN and mixed IP & ISDN video meetings.
Encryption There can not be a mix of encrypted and non-
encrypted calls in a Multiway call. Either all participants must
be encrypted or all must be non-encrypted.
* MultiSite
is available on systems with the optional MultiSite
feature supported and installed.
** Multiway
is available on systems with a Gatekeeper and an
external MCU configured for using Multiway.
All
Control Panel >
Menu Settings >
INPuT EDITOR LANGuAGE
CuSTOM:
When the Input Editor Language is set to Chinese, Korean, japanese or Russian the user will
be able to enter Chinese/Korean/japanese/Russian characters into an input field like the System
Name or Phone Book, using the remote control.
OFF:
When set to Off the user will only be able to enter ASCII characters into an input field like the
System Name or Phone Book, using the remote control.
All
41
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
The settings library
