Dialing in From Outside the Enterprise
Dialing in without being registered to a Cisco Gatekeeper
The feature enables dialing through a TANDBERG Gatekeeper without being
registered to it. This makes it easy to call in from a video system outside the
enterprise.
It's done by dialing:
EndPointAlias@GatekeeperAddress[:Port]
where:
•
EndPointAlias
: is the alias of the endpoint you want to call, the endpoint you
call must be registered with this alias on the gatekeeper
•
GatekeeperAddress
: is either the IP-address of the gatekeeper in the form
a.b.c.d (or IPv6 a:b:c:d:a:b:c:d) or the DNS name (A/AAAA or SRV record) of the
gatekeeper.
•
Port
: is optional and gives the Q.931 port to initiate the call. The port default is
1720 and can in most cases be left out.
If using an IP-address, or if not specifying the port, the default is using the normal
Q.931 with port 1720.
NOTE!
To be able to make such a call, this feature must be enabled in your
gatekeeper or border controller, and the called endpoint must be registered with
the enterprise gatekeeper or border controller.
103
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
Appendices
