manualshive.com logo in svg

Cisco TelePresence 1000 MXP, Administrator'S Manual

Share
Download
Cisco TelePresence 1000 MXP Administrator'S Manual Download Page 74

MENu ADDRESS

SETTINGS DESCRIPTION

INFORMATION

PRODuCT

Control Panel >
Network >
LAN Settings >

IP SETTINGS

GATEWAy

When using DHCP, the default gateway address will be set automatically. 
If the LAN utilizes static IP addresses, the IP address, subnet mask, and default gateway must be 

specified by the LAN administrator.

Restart System After Changes
Changes in IP Settings menu will have no effect until the 

system is restarted.

All

Control Panel >
Network >
LAN Settings >

IP SETTINGS

ETHERNET SPEED

Set the speed of the Ethernet network.

AuTO: 

The codec will auto-detect the speed and half/full duplex on the LAN. 

10/HALF: 

The codec will connect to the LAN using 10 Mbps speed / Half Duplex.

10/FuLL: 

The codec will connect to the LAN using 10 Mbps speed / Full Duplex.

100/HALF: 

The codec will connect to the LAN using 100 Mbps speed / Half Duplex.

100/FuLL: 

The codec will connect to the LAN using 100 Mbps speed / Full Duplex. 

Restart System After Changes
Changes in IP Settings menu will have no effect until the 

system is restarted.

All

Control Panel >
Network >
LAN Settings >

IP SETTINGS

IP ACCESS PASSWORD

By setting an IP Access Password on the system, all access to the system using IP (Telnet, FTP and 

WEB) requires a password. 
The default IP Access Password is 

TANDBERG

 (NOTE: It is case sensitive!). Maximum length is 16 

characters.
The IP Access Password can also be set from the Control Panel > Security Settings > IP Access 

Password menu.

Restart System After Changes
Changes in IP Settings menu will have no effect until the 

system is restarted.

All

Control Panel >
Network >
LAN Settings >
IP Settings >

DNS SETTINGS

DNS SERVER 1 - 5

Set the DNS - Domain Name Server - Address to define the network addresses for DNSs.
Up to 5 addresses may be specified. If the network addresses are unknown, please contact your LAN 

administrator or the Internet Service Provider.
DNS Server Address Format:
IP Address: 

10.0.0.2

DNS Domain Name: 

example.com

Restart System After Changes
Changes in IP Settings menu will have no effect until the 

system is restarted.
DNS - Domain Name Server

All

Control Panel >
Network >
LAN Settings >
IP Settings >

DNS SETTINGS

DNS DOMAIN NAME

DNS Domain Name is the default domain name suffix which is added to unqualified names.
Example: If the DNS Domain Name is 

company.com

 and the name to lookup is 

videosystem

, this will 

result in the DNS lookup 

videosystem.company.com

. 

Restart System After Changes
Changes in IP Settings menu will have no effect until the 

system is restarted.

All

74

Cisco TelePresence MXP Series

Administrator guide

D14791.01 MXP Series Administrator Guide F90, August

 2011.  

Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.

www.cisco.com

Contents

Contact us

Introduction

The menu structure

The settings library

Getting started

Appendices

The settings library

Summary of Contents for TelePresence 1000 MXP













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands