MENu ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODuCT
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
LEASED E1/T1 SETTINGS
MAX CHANNELS
Indicates the maximum number of channels the codec is allowed to use on the E1/T1 interface.
E1:
Maximum 30 channels when E1 is selected.
T1:
Maximum 24 channels when T1 is selected.
All with
leased line
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
LEASED E1/T1 SETTINGS
START CHANNEL
Indicates the first E1/T1 channel the codec is allowed to use.
This setting might be used if the E1/T1 line is shared with other equipment.
All with
leased line
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
LEASED E1/T1 SETTINGS
T1 LINE CODING
B8ZS:
Indicates how the signals on the line should be coded.
B8ZS-RESTRICTED:
If parts of the line between the systems use restricted coding, this should be
selected.
B8ZS - Binary 8 Zeros Substitution
NOTE!
All settings must be identical on both sides of the
Leased E1/T1 connection.
All with
leased line
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
Leased E1/T1 Settings
LINE SETTINGS
T1 CABLE LENGTH 1
Configures the ISDN-PRI Line Settings.
Specify the distance (0-133 ft) of the CSU connected to the E1/T1 Port 1 on Codec 1.
CSU = Channel Services Unit
All with
leased line
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
Leased E1/T1 Settings
LINE SETTINGS
E1 CRC-4
E1 CRC-4 is used for most E1-PRI configurations.
ON:
Select On if E1 CRC-4 is supported by your E1 network equipment.
OFF:
Select Off if E1 CRC-4 is not supported by your E1 network equipment.
CRC - Cyclic Redundancy Check
All with
leased line
71
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
The settings library
