Services for Multipoint Calls
A Multipoint Control Unit (MCU) enables several sites to articipate in
the same conference. During an MCU conference, the status line will
provide information about the conference.
Embedded or external MCu
The MCU can be embedded or external (MPS), but when making a
call the user will not see any difference. The system administrator
may want to configure the Multipoint Call Options. See the Control
Panel > General > Multipoint Call Options.
External services from TMS
The External Services lets you obtain information from the Cisco
TelePresence Management Suite (TMS).
About the External Services Menu
The External Services menu lets you see information obtained from
the Cisco TelePresence Management Suite (TMS)
•
Today’s Bookings
•
System Contact Information
How to Enable the External Services Menu
The External Services menu is available only when the External
Services settings are configured (enter the Address and Path to the
TMS and set the External Services to On). Go to Control Panel >
General > External Server > External Services.
External services features
•
External Services (from TMS)
•
Request Floor and Release Floor
•
Conference Layout
•
Terminal Names
•
Chair Control
•
Assign Floor and Release Floor from Participant
•
View Site and End View
•
Disconnect Participant
•
Terminate Meeting
•
More about Multisite (embedded MCU)
•
More about MultiWay
TM
•
Text Chat
The
MultiSite
and
Multiway
features are explained in
The setting
library
section.
All other issues from the list above are explained in the
MXP
User
Guide, see the
http://www.tandberg.com/docs
101
Cisco TelePresence MXP Series
Administrator guide
D14791.01 MXP Series Administrator Guide F90, August
2011.
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
www.cisco.com
Contents
Contact us
Introduction
The menu structure
The settings library
Getting started
Appendices
Appendices
