Canon CXDI-31, Service Manual

Page: 89 / 209

2 Installation Manual
- 63 -
Examples of parameters used with different makers and types of printers (reference)
•
Kodak MLP190
Default
Parameters
-A 320 -T NO -M CUBIC –m NORMAL -S CS000
(entered in param member)
80 (entered in pixelPitch member)
14 x 17
4096 (entered in W member)
5120 (entered in H member)
Significance
•
Trimming OFF
•
Cubic spline interpolation
•
Smoothing: normal
•
Maximum density: 3.20
•
Curve shape 0 (density linear) as Config Info
•
Kodak KE Kodak Print Spooler Model 100
Default Parameters
-A 320 -T NO -M CUBIC –m NORMAL -S CS000
(entered in param member)
79 (entered in pixelPitch member)
14 x 17
4090 (entered in W member)
5120 (entered in H member)
11 x 14
3194 (entered in W member)
4096 (entered in H member)
Significance
•
Trimming OFF
•
Cubic spline interpolation
•
Smoothing: normal
•
Maximum density: 3.20
•
Curve shape 0 (density linear) as Config Info
•
Agfa DryStar 3000
Default
Parameters
-A 320 -T NO -M CUBIC -m 140 -S “PERCEPTION_LUT=200”
(entered in param member)
80 (entered in pixelPitch member)
14x17
4256 (entered in W member)
5174 (entered in H member)
Significance
•
Trimming OFF
•
Cubic spline interpolation
•
Smoothing: slightly sharp (edges emphasized)
•
Maximum density: 3.20
•
S “PERCEPTION_LUT=LINEAR” (If the output fails to be linear with “LINEAR”, on-
site adjustments with the printer manufacturer must be performed.