Canon CXDI-31, Service Manual

Page: 120 / 209

2 Installation Manual
- 94 -
(4) Connections
1) Check that all equipment is turned off.
2) Connect the keyboard and mouse to the control PC.
3) Connect the laptop PC and the network card of the control PC using a 10BASE-T cross
cable.
* When using a straight cable, connect the PCs via the tool HUB.
(5) Settings
1) Turn on the operation unit power and then the control PC power.
2) The CXDI application starts. Press the [Alt] + [Tab] keys to switch the program to the
Command Prompt screen.
3) The message “Welcome to Canon CXDI” appears. Input [8] and press the [Enter] key.
(Select “8 Exit”.)
4) The Windows NT desktop screen appears.
5) Turn on the laptop PC power.
* This section describes the backup procedure using Windows95 as the OS.
6) Windows95 starts. Click [Network Neighborhood] with the right button of the mouse,
then click [Properties].
7) The [Network] window appears. Click the [Access Control] tag and set [Control access to
shared resources using:] to [Share-level access control].
8) Click the [Identification] tag and input the following items.
Computer name : The name is optional, but must be input.
Work group : Set the same as the control PC.
Computer Description : Input is optional.
9) Click the [Configuration tag], then click [TCP/IP] under the [The following network
components are installed] item and click [Properties].