Canon CXDI-31, Service Manual

Page: 97 / 209

2 Installation Manual
- 71 -
•
Fuji CR-DPL /FM-DPL + FM-PS551
Maxmum
equivalet area
in CXDI
2200 x 2675 (@160
µ
m)
Specifications
100
µ
m x 3520 x 4280 (value after passing through the print spooler)
•
The above settings are the allowable area size in a configuration not using
annotation.
•
Annotation will be supported from the next version. Annotation in currently
possible in US-ASCII only. IDs are designated 1 to 6 and correspond to the
top left, top center, top right, bottom left, bottom center, and bottom right,
respectively. The maximum area size with annotation support is 3500 x
4170 for 35 cm x 43 cm and 2538 x 3522 for B4.
•
Use the Disable function for N-EVENT-REPORT to disable this setting.
•
A function is provided for disabling the returning of warning messages.
0107 (Attribute list error) Return/Not return
0116 (Attribute Value out of Range) Return/Not return
B604 (Image has been demagnified) Return/Not
return
•
The Film Size parameter can be used. The Media Type (BLUE, CLEAR)
parameter can also be used.
•
The Film Orientation parameter is fully supported.
•
The following presets are made so that LUT has the DMAX = 3.2D
equivalent curve required by CXDI.
Gamma type #17 (SAR system)
Density Shift Contrast
Point 1 1.57 0.10 1.00
Point 2 2.29 0.15 1.00