Canon CXDI-31, Service Manual

Page: 30 / 209

2. Installation Manual
2.2. CXDI-31 system installation procedure
No. Step Conditions and checkpoints Reference
1 Unpacking and
checking the product’s
constituent parts
There must be no missing parts, damage,
dents, etc. Instruction
Manual
2 To connect the image
Unit and the E/O box
- Handle the instrument carefully, as it may
be damaged if something is hit against it,
dropped, or receives a strong jolt.
- The cables must be routed in such a way
that no unreasonable loads are brought to
bear upon them. Instruction
Manual
3 To connect the E/O box
and the sensor unit
- The cables must be routed in such a way
that no unreasonable loads are brought to
bear upon them. The CXDI-C1
Service Manual
4 To connect the E/O box
and the multi box
- The cables must be routed in such a way
that no unreasonable loads are brought to
bear upon them. Instruction
Manual
5 To connect the multi
box and the control PC
- The cables must be routed in such a way
that no unreasonable loads are brought to
bear upon them. The CXDI-C1
Service Manual
6 To connect the multi
box and X-ray
generators - The cables must be routed in such a way
that no unreasonable loads are brought to
bear upon them.
- The manufacturer of the X-ray generators
must be asked to handle the connections with
the generators. Instruction
Manual
7 Checking the software
program’s version - The compatibility of the sensor unit and the
control PC must be checked on the
compatibility list, and the software program
must be installed or upgraded as required. Instruction
Manual
10 Installing the LANMIT
Image correction data
Instruction
Manual
11 Identifying the imaging
units and setting the
number of units to be
connected (inputting the
sensor serial numbers) Instruction
Manual
12 Adjusting the timing
with the X-ray
generators - To support a 2-tube configuration, the
timing must be adjusted with each of the
generators. Instruction
Manual
- -
4