Canon CXDI-31, Service Manual

Page: 72 / 209

2 Installation Manual
- 46 -
4.3.11. Network connections
Network settings
(1) Objective
These settings are for connecting the CXDI to the network.
1) Set the CXDI’s IP address, subnet mask and default gateway in Windows NT.
2) Set the printer and storage output destinations and parameters on the user screen.
(2) Checkpoints
1) This item involves checking the details of the checks performed on network setting
parameters among the pre-installation inspection details and setting these parameters.
* Refer to “Appendix: Investigation Report” for the pre-installation investigation
details.
2) Perform the settings of this item carefully since any errors made in these settings will
make it impossible for connection to be made to the network or the images to be
transmitted properly, etc.
(3) Windows NT settings
1) Connect the keyboard and mouse to the control PC.
2) After turning on the operation unit’s power and then the control PC’s power, start
Windows NT.
3) The Windows NT desktop screen appears. Right-click the [Network Neighborhood] icon,
and select [Properties] from the menu.
4) “Network” appears. Click the “Protocol” tab.
5) “Protocol” appears. Click [Properties].