Canon CXDI-31, Service Manual

Page: 153 / 209

2 Installation Manual
- 127 -
9. Specifications & Standards
9.1. Specifications
9.1.1. Imaging unit
The Imaging unit consists of a sensor, a built-in sensor power supply, an A/D board and
a cover, etc. X-rays are read electronically as image signals by the sensor, according to
changes in visible light from the fluorescent screen. Captured image signals undergo
A/D conversion and pass through the 31EO box and the multi box for transmission to a
PC.
Item Details Remarks
Object General shooting
X-ray sensor Scintillator and Amorphous
Silicon (a-Si) sensor LANMIT sensor
Effective filming range 226mm x 288mm
Pixel matrix size 2256 x 2878 Unit pixel
No. of pixels About 6.5 million
Pixel size 100 µm
Sensor output gradation 16,384 14 bit
Output gradation 4,096 12 bit
Interface DICOM3.0 (Ethernet) Via control PC
Grid type Fixed grid 6 options
System control unit Control PC, multi box Sold separately
E/O box Provided Bundled
Sensor cable Length: 4.5m (Dia.: 10mm)
X-ray monitor 1 location Built in
Sensor DC-DC power supply Built in
Grit detection Provided Present/not present only
Position detection None
Status display Built in LED Color (Green and Red)
Power consumption Max. 45W (av. 12W)
External dimensions 324(W) x 327(L) x
20.3(H)mm
Weight 2.8kg (cable: 0.5kg)
[Table 1]
9.1.2. E/O box
There is a cut-off function for the film camera unit’s transmission signal and power
supply.
Transmitted signals are converted from electrical into optical signals.
The CXDI-31 can be connected to two E/O boxes.
Item Details Remarks
External dimensions 270(W) x 190(L) x 65(H)mm
Weight 2.2 kg
[Table 2]