Canon CXDI-31, Service Manual

Page: 52 / 209

2 Installation Manual
- 26 -
8) The Boot code menu is displayed on the HyperTerminal screen. Select “9: Misc”.
0:
1: Debug commands
2: Memory
3: Log
4:
5:
6:
7:
8:
9: Misc
9) The menu shown below is displayed. Select “9: Jump to main code”.
0: Re-fix sns port
1:
2:
3:
4:
5:
6: Initialize system timer
7:
8:
9: Jump to main code
10) A message is displayed indicating that the system has switched to main code. Press the
[Enter] key.
--- CXDI-22 Capture Main Code Ver.2.0.12 for SSB ---
total operation time = *d**h**m**s***ms
MSG:[CAPT/DPR/DEC] STS reg rcv 4000
:
:
:
MSG:[LIB/DPR/TRN] DPR trn done 0001