Canon CXDI-31, Service Manual

Page: 92 / 209

2 Installation Manual
- 66 -
•
Nishimoto EL2000N
Default Parameters
-A 320 -T NO -M CUBIC -S 15
(entered in param member)
80 (entered in pixelPitch member)
4444 (entered in portraitW member)
5296 (entered in portraitH member)
5296 (entered in landscapeW member)
4444 (entered in landscapeH member)
“Prepare images using CXDI” : Yes
A simple calculation yields a resolution of 4444 x 5400 for the display area of the model
EL2000. However, 5376@80
µ
m is set in the perpendicular direction of the model
EL2000 since the maximum size of the CXDI images is 2688@160
µ
m. In this case, a
small non-image area should be output as the border in the up/down direction on the film
according to the calculation. In actual fact, however, the image will protrude in some cases
depending on how the transport speed and other factors have been adjusted. The
specifications are as follows although they cannot be set at the present time:
14" x 14" : W=4444, H=4444 (for portraits)
11" x 14" : W=4444, H=3660 (for portraits)
Significance
•
Trimming OFF
•
Cubic spline interpolation
•
Maximum density: 3.20
•
“15” in Config Info is linear.
•
The rest is done by the printer itself.
Up to 5376 pixels can be set for H.