Canon CXDI-31, Service Manual

Page: 65 / 209

2 Installation Manual
- 39 -
7) By inputting
the serial number of sensor 1 in “A/D Board Serial Number for SensorID#1”,
the serial number of sensor 2 in “A/D Board Serial Number for SensorID#2”,
the serial number of sensor 3 in “A/D Board Serial Number for SensorID#3” and the
serial number of sensor 4 in “A/D Board Serial Number for SensorID#4”,
it is possible to allocate the respective sensors to the sensor IDs displayed on the
operation unit.
Check that DEF has been selected as the “Fixed Defect Pixel, DEF or NO” setting.
@@@@@@@@ Capture Device Cofigration Table @@@@@@@@
Format Version [0 = 0x0] : 0
Max Capture Devices [4 = 0x4] : 4 .......................
Å The Number of connected sensor units
@@@@@@@@ Capture Device Configration No.0 (SensorID#1 OPU)@@@@@@@@
------A/D Board Serial Number 0-0 -> 0x199
------A/D Board Serial Number 0-1 -> 0x2009
------A/D Board Serial Number 0-2 -> 0x123
------A/D Board Serial Number 0-3 -> 0x124
A/D Board Serial Number for SensorID#
[0x199 = 409] : ..................
Å
Serial No.
R Capture Board Index [0 = 0x0] : 0 of sensor 1
R A/D Board Index [0 = 0x0] : 0
R LANMIT Index [0 = 0x0] : 0
Custom Type[0:NO CUSTOM 1:STAND 2:TABLE 3:UNIV 4:CASSETTE] [0 = 0x0] : 0
White Average Min Limit
[2000 = 0x7D0] : 2000
White Average Max Limit [3000 = 0xBB8] : 3000
White Diff Limit [500 = 0x1F4] : 500
Times Of The Standard Dev. [10 = 0xA] : 10
Fixed Defect Pixel, DEF or NO [DEF] : DEF.................... Å Normally DEF
:
:
: