Canon CXDI-31, Service Manual

Page: 86 / 209

2 Installation Manual
- 60 -
(18) -r pixel_pitch
-r pixel_pitch
Transfer pixel pitch for designating the request image size (Pixel Pitch in um)
Meaning
* This parameter is used in the DICOM Basic Image Box (2020, 0020).
* Reverse image density
* This parameter is used in the DICOM Basic Image Box (2020, 0010).
* Position of the image on film
* The cumulative value for the horizontal size of the image (raw) at the
designated pixel pitch is used for the request image size.
* The CXDI automatically uses 131072 internally for operation.
* The above value can be overwritten by designating a specific value.
Description Æ If this parameter is not designated, it is not transferred over DICOM. In this
case, the type of image that is printed depends on the settings at the printer side.
(19) -N annoFmt
-N annoFmt
Annotation position (1/2/3)
Meaning
* This parameter is used in the DICOM Basic Annotation Box (2030, 0010).
* This parameter designates the position of the character string to be annotated.
Description * If using annotation, always be sure to transfer the annotation position.
(20) -n annotation
-n annotation
Annotation (character string)
Meaning
* This parameter is used in the DICOM Basic Annotation Box (2030, 0020).
* This parameter designates the character string to be annotated.
Description * If this parameter is not designated, it is not transferred over DICOM. In this
case, the printer default values are used.
* Also, in this case, the type of image that is printed depends on the settings at the
printer side.
(21) -u maxPDU
-u maxPDU
Maximum PDU value in byte units
Meaning
* The CXDI automatically uses 131072 internally for operation.
* The above value can be overwritten by designating a specific value.
Description * The DICOM standards do not allow values of 1301073 or higher to be set.
* This parameter is used when the operator of the connected storage device
requests a size change.
* In DICOM storage devices, note that the argument title changes to -m.( Æ See
the storage device parameters.)
(22) -t callingTitle
-c calledTitle
Called App Entity Title
Meaning
* The AE Title setting field is automatically used in this setting.
* The above value can be overwritten by designating a specific value.
Description * Note that the meaning is opposite of the argument -c for DICOM storage
devices.
( Æ See the storage device parameters.)
* The entry for the OPU output device title is used here.