Canon CXDI-31, Service Manual

Page: 47 / 209

2 Installation Manual
- 21 -
4.3. Settings
4.3.1. Checking and Setting the Date and Time
(1) Purpose
The date and time is set to Japan standard time at factory shipment.
Reset the date and time to your local value as necessary.
(2) Procedure
1) Connect the keyboard and mouse to the rear of the control PC.
2) Turn on the system power and start the CXDI. (excluding stand)
3) After the CXDI application starts, press the [Tab] key while holding down [Alt] key to
display the command prompt.
4) The message “Welcome to CCR” appears in the command line. If it does not appear,
press [Esc] key.
5) Then enter the number [8] and press [Enter] key.
6) Minimize the command prompt window.
6) The Windows NT desktop appears.
8) Select Setting from the Start menu and open the Control Panel.
9) Click the Date and time icon to open the date and time property.
Start Æ Setting Æ Control Panel Æ Date and Time
10) The Date and time property contains date, time, and time zone tags. Change the values,
press the Update button, and then the OK button to close the date and time property.
11) The Windows NT desktop appears.
12) Restart Windows NT.