Canon CXDI-31, Service Manual

Page: 31 / 209

2. Installation Manual
No. Step Conditions and checkpoints Reference
13 Inserting the backup
floppy disk - It must be confirmed at re-start that backup
files have been made. Instruction
Manual
14 Calibration - No errors must be displayed.
This calibration must be performed with the
photo timer OFF
Operation
Manual
15 Setting the Fixed ROI
Areas - If necessary, to set the ROI area. Operation
Manual
16 Connections to the
network and setting the
output destination Instruction
Manual
17 Startup settings Instruction
Manual
18 Radiographic testing - Radiography must be performed after
calibration.
- The images must be checked using charts
and phantoms.
- The data must be sent to the printer and
storage and the images must be checked.
Instruction
Manual
19 Checking the linearity
of the transferred image
density
Instruction
Manual
20 Operation unit gamma
correction
Instruction
Manual
21 Body parts settings - The engineer in charge must be consulted
prior to performing these settings. Operation
Manual
22 Checking and
performing the system
settings
- The engineer in charge must be consulted
prior to performing these settings. Operation
Manual
23 Anchoring Instruction
Manual
24 Deleting unnecessary
data
The CXDI-C1
Service Manual
25 Cleaning
26 Explaining operation to
the user
Operation
Manual
27 Final parameter
adjustments
- The engineer in charge must be consulted
prior to narrowing down the adjustments to
the final values. Operation
Manual
28 Backing up valuable
data
Not necessary for the systems installed in
vehicles.
Instruction
Manual
[Table.2]
- -
5