Chapter 5 Web-Based Operations
80
Lynx DSA User's Manual - 9240227J
Progress Bar
The progress bar displays the acquisition progress. The information that is displayed
is dependent on the preset option and acquisition mode. The percent complete rules
are as follows:
•
If computational presets are enabled and time presets are disabled, the
progress bar will indicate percent completed and the progress value will
display the current elapsed computational value.
•
If the time or sweeps presets are enabled, the progress bar will indicate
percent complete and the progress value will display the current elapsed
value.
•
If no preset condition has been set the progress bar will not be filled-in and
the percent complete will indicate 0.0%.
Digital Oscilloscope
The Lynx incorporates electronics with oscilloscope-like capture which allows
examination of the signals reconstructed in time to assist and verify instrument setup,
pole/zero optimization and manual Reset Preamp Inhibit adjustments. The digital
oscilloscope plot displays the representation of the selected digital signals, up to
eight. Located on the top right-corner of the Lynx Web Client Application is the
option to enable / disable the digital oscilloscope. Selecting the button to “On”
(
) will enable the digital oscilloscope main screen as shown in
Figure 43: Digital Oscilloscope Main Screen
