Chapter 4 System Setup
40
Lynx DSA User's Manual - 9240227J
Step 1 - Selecting the MCA
The Select MCA screen lets you select the MCA you want to create a definition for.
Select “Lynx MCA” from the list of available MCAs by clicking on the ‘+’ symbol
next to Network MCAs, and then click the
Next
button.
Figure 16: Selecting the MCA
Step 2 - Configuring the MCA
Note: At this point in the setup process the Lynx is required to be connected to the
network or directly to the host computer. The device’s IP address or UPnP
name will be required to complete the setup. Refer to the
Communications
Setup Appendix
starting on page 150, as it describes the initial setup and basic
operation of the communication interfaces.
