Defining an MCA
Lynx DSA User's Manual - 9240227J
33
Deleting an MCA
If you want to remove an MCA that you have added to the definition, you can do it
easily by:
1.
Selecting the table entry you want to delete. Be sure the entry to be deleted is
highlighted.
2.
From the
Edit
, select
Delete MCA
.
3.
The Delete MCA dialog box opens. Click on
OK
to remove the entry in the
table.
Figure 9: The Delete MCA Dialog
Defining an MCA
This section discusses setting up a Lynx-based MCA, which has a fully
programmable front end, high voltage, and signal processing, then saving that
configuration as a MID file.
To begin, click on the Lynx MCA entry in the Definition Table (shown below) that
you want to set up. The selection should be highlighted.
Figure 10: Selecting the MCA to Set Up
