Overview of the Lynx Web Client User Interface
Lynx DSA User's Manual - 9240227J
77
The DSO plot displays the digital signals associated with the signal processing of the
analog signal. All DSO settings are displayed below the graph area.
The DSO Plot is deactivated by selecting the DSO button to “Off” position
(
) located in the vicinity of the upper right corner of the graph area.
See
Digital Oscilloscope
on page 116 for more information.
Information View
The Information View is activated by selecting the Information tab located below the
graphics area of the page. The Information view displays the Acquisition or
Calibration data.
Acquisition
Displays Acquisition Mode, Acquisition Start time, Dead Time, Preset and
Elapsed for the current Input selection. The display updates dynamically during
acquisition.
Calibration
Displays the current calibration coefficients in effect used by the spectrum graph
to convert X-Axis values from channel numbers to energy when the graph’s X-
Units are set to Energy. The type of mathematical model is also shown.
