email: [email protected]
- All data without guarantee, except technical modification -
Page 1 - 10
V17/02
NCTE torque sensors
Series 2300
Technical data
Nominal torque: 2,5 Nm to 100 Nm, bidirectional
Rotational speed: ≤ 10.000 rpm
Accuracy: ≤ ±0,5 %
Temperature range: -30 °C to +85 °C
Protection class: IP50, IP65
Output signals: 0-10 V/4-20 mA/CAN-Bus/USB
Output frequency: 1.000 Hz
Your advantages
Made in Germany (nearby Munich, Bavaria)
Delivery ex warehouse (
<
two weeks)
Best price-performance ratio
Integrated electronic (Plug & Play)
Contactless measurement system
Including 5 m cable and calibration certificate
The 2300 series is the most cost-effective entry into professional torque measurement technology.
This series is mainly used in automotive test facilities, professional testing construction, climatic exposure
test cabinets (exceeding dew point), process monitoring and medical engineering.
Transmitted torque can be measured statically and dynamically in real time. Shaft is available as Round shaft
and Square shaft. Each sensor can be configured individually with a lot of extras, such as angle sensor and
protection class IP65.
Series 2300 offers a wide range of output signals such as 0-10 V, 4-20 mA, CAN-Bus or USB. USB is offered
including a special NCTE software enables to show data in real time.
The sensor is provided as a complete unit with integrated evaluation electronic, including 5 m cable,
keystones (Round shaft) and calibration certificate.
Short description
