A Brief Overview of the Lynx User Interface
Lynx DSA User's Manual - 9240227J
9
•
Enter http://10.0.0.3/login.asp?html5=1 for accessing a ‘legacy’ HTML web
site that has limited functionality. Limited functionality including no DSO,
no time-series plot, no interactive spectrum plot.
•
Enter http://10.0.0.3/login.asp?Java=1 for the accessing the Java-enabled web
site.
For new, out-of-the-box system, follow the Quick Setup Summary in the
Communications Setup Appendix
starting on page 150.
Basic steps to quickly access the Lynx (in most cases):
•
Connect and set up the Lynx for a network connection; see the
Communications Setup Appendix
starting on page 150. Then, from your
computer, launch your Internet browser (e.g., Microsoft Edge) to access the
Lynx’s web interface.
•
The default URL address of
http://10.0.0.3/
for Ethernet connection
is factory preset. The address, by default, is static. Type the URL in the
browser’s address bar then press Enter.
•
If the communication is successful, the Lynx Web Client application should
download to your browser and automatically connect to the Lynx, rendering
a page similar to the following.
Figure 2: Default Lynx Web Client Application Page
If your browser cannot access the Lynx, and your connection to the Lynx is
via Ethernet and you followed the procedure in the
Communications Setup
Appendix
starting on page 150, then please
stop
and contact your Lynx
administrator.
